IR1759-MK5-AT3130-EDCONT MINIRAY
TE Connectivity - Aerospace, Defence & Marine
/// Application Tooling
Page
14
of
36
Rating information of controller,/Model serial number/ Manufacturer’s address
.
Emergency Stop
The equipment has no separate emergency stop system. Use:
The ON/OFF switch (Fig page 9) on the rear panel.
Or removing the power lead from the mains supply can be used to disconnect the equipment
from the mains supply.
.
MINIRAY Hand Tool Supply Cable
The cable between the Controller and the MINIRAY Hand Tool carries supply and signal voltages
and
should not be disconnected whilst the controller is switched on.
3.6 Standard Electrical Rating Label/Operating Equipment Safety
