IR1759-MK5-AT3130-EDCONT MINIRAY
TE Connectivity - Aerospace, Defence & Marine
/// Application Tooling
Page
36
of
36
10. Holding Fixture
The AD-1319-9 holding fixture is a tool that simplifies and speeds installation of Raychem Solder-
Sleeve terminations or splices and SolderTact shielded contacts
The tool is modular and can be used for the following:
Splices or terminations
SolderTact adaptor
As a standard the AD-1319-9 comes with two lateral wire clamps. The user can set the distance
between those clamps by adjusting the jaws in the proper alignment. The operator can then centre
the product in the fixture and easily install product having the wire or cable secured.
To mount a Solder-Tact contact adaptor, the user has to remove the basic clamp on one side and
insert the adaptor (AT-1319-XX). The distance between contact adaptor and cable clamp should be
approximately 38 mm (1.5 inch).
Adaptor and cable clamp should be adjusted to be in line.
TECHNICAL SPECIFICATION
Dimensions W x L
180 x 150 mm (7”x 6” )
approx.
Weight
300 g (.67lbs)
PRODUCT RANGE
SolderSleeve splices
Dura-Seal, Mini-Seal, One
Step
Shield terminators
D-100-XX, D-144-xx, SO63,
SO96
SolderTact contacts
D-602-xx
Description
PCN
Holding fixture
AD-1319-9
993850-000
38999 size 8 SolderTact adaptor
AT-1319-22
395241-000
38999 size16 SolderTact adaptor
AT-1319-78
413186-000
Submin SolderTact adaptor
AT-1319-12
993872-000
748 SolderTact adaptor
AT-1319-14
993877-000
723 SolderTact adaptor
AT-1319-19
993938-000
482 size 16 SolderTact adaptor
AT-1319-17
993917-000
AD-1318-9 Holding Fixture
