IR1759-MK5-AT3130-EDCONT MINIRAY
TE Connectivity - Aerospace, Defence & Marine
/// Application Tooling
Page
12
of
36
Read All Instructions before Using (This Equipment) To reduce the risk of fire, electric shock,
or injury.
DANGER
The MINIRAY Controllers are connected directly to the AC mains electricity supply.
Before starting any electrical maintenance or repair, always turn off the equipment and ensure
itis completely disconnected from the mains supply.
Do not open the case of the MINIRAY Controller or Hand Tool whilst the equipment is
connected to the mains supply. The MINIRAY equipment must be connected to an earth
ground power supply, which must be protected by a 30mA residual current device.
The MINIRAY equipment must not be hard-wired to a mains supply.
Use only specified fuse types and ratings.
Power connections for the tool must conform to local standards and regulations
Potentially hazardous voltages will be exposed if the equipment covers are removed while it is
powered or if any of the cables are damaged. Do not use the equipment if the cables are
damaged or any of the external panels are removed or exposed in any way.
CAUTION!
Note: Risk of burning upon contact with hot parts.
Care must be taken not to touch any exposed hot metallic surfaces of the tool or product. Special
care must also be taken whilst handling product immediately after installation.
It is recommended that protective clothing and gloves are used when operating this tool.
3.2 Electrical Safety
3.3 Hot Surfaces Safety
