4 - 48
MicroVision
FX
Using record to create tracks
In Stage mode, the following keystrokes create the five cues illustrated
below. Each cue adds channels to the previous cue. The example uses
Record to record the cues.
Cue 1
[Chan] [1] [Full] [Record] [1] [Enter]
Cue 2
[Chan] [2] [Full] [Record] [2] [Enter]
Cue 3
[Chan] [3] [Full] [Record] [3] [Enter]
Cue 4
[Chan] [1] [At] [2][5] [4] [Full] [Record] [4] [Enter]
Cue 5
[Chan] [1] [Thru] [4] [At] [0][0] [Record] [5] [Enter]
These keystrokes produce the results illustrated in Figure 1.
Cue 1
Cue 2
Cue 3
Cue 4
Cue 5
Channel 1
FF
FF
FF
25
00
Channel 2
FF
FF
FF
00
Channel 3
FF
FF
00
Channel 4
FF
00
Channel 5
Figure 1
Notice the horizontal tracks developed by keeping a channel at the same
level through a number of cues. For example, channel 1 tracks from cue
1 to cue 3.
Note that channels remain at set levels while you program the series of
cues because they are captured and have not been released.
