4 - 16
MicroVision
FX
Cue 4: Creating linked cues
MicroVision FX lets you link cues to create a sequence that runs auto-
matically. You can link a string of cues, or you can create a loop to
produce a chase.
1.
Create and record a cue using techniques described for cues 1
through 3.
2.
Press [Link].
3.
Enter cue number to which you want to link current cue. You can
enter either a cue number that exists already or one you are going to
create. Press [Enter].
4.
Enter delay time in minutes and seconds or with a fraction of a
second in decimal format. For example, all of the following are
acceptable: .2, 00:12, 5.5, 5:30. Delay times may be between .1
second and 99:59 (minutes:seconds).
The delay time is the length of time after the first cue starts before
the cue it is linked to starts. For example, if the delay time for the
link is 10 seconds, the second cue starts 10 seconds after the first
cue begins.
MicroVision FX enters a default delay time that equals the total
running time of the first cue. That way, the cues run back to back.
The total running time of a cue is the longer of either the upfade
time or the downfade times.
To change the delay time for a cue that is already linked, press [Link]
twice, enter delay time, and press [Enter].
Note: If you are entering link information for existing cues, you do
not have to rerecord the cue.
