ETC microVision FX User Manual Download Page 43

Page: 43 / 191

chapter 4

tutorial

This chapter includes lessons on working with

MicroVision FX’s basic

features: cues, submasters and chases. Each lesson is described briefly
below.

•

Lesson 1 describes display and channel modes and record functions.

•

Lesson 2 includes instructions for creating several cues.

•

Lesson 3 includes instructions for creating submasters.

•

Lesson 4 includes instructions for playing back cues and
submasters.

•

Lesson 5 includes instructions on creating and running chases.

•

Lesson 6 includes instructions for saving your work on disk.

•

Lesson 7 includes information about the Track record function.

For an alphabetical listing and explanation of all features, keystrokes and
menu options, see

Chapter 7, Reference.

Summary of Contents for microVision FX































































































































































































Search results

Summary of Contents for microVision FX

Reviews:

Related manuals for microVision FX

Brands by name

Popular brands

ETC microVision FX, User Manual

Search results

Summary of Contents for microVision FX

Reviews:

Related manuals for microVision FX

Brands by name

Popular brands