Chapter 4 Tutorial
4 - 25
Selecting cues
There are three ways a cue can be selected to playback on stage:
1) when a cue is playing,
MicroVision FX automatically selects the next
cue; 2) you select cue manually; or 3)
MicroVision FX automatically
selects linked cues. You must be in Stage mode to select cues to
playback.
When one cue is playing,
MicroVision FX assumes that you want the
next consecutive cue to play next. To play the next cue, press either one
of the [Go] switches (A/B or C/D). You can press [Go] while you are
viewing the Blind mode screen if the correct cue is already selected on
the cue sheet.
To select a cue out of sequence, press [Cue], and enter the cue number.
Then press either of the [Go] switches to start playing the cue.
Linked cues begin playing automatically. When you play a string of linked
cues, or cues linked together in a chase loop, you only need to start the
first cue.
