ES5340.2 Electric Drive Simulation Board - User’s Guide
85
ETAS
Configuring the Hardware in LABCAR-RTC
4. To configure multiple analog outputs in this item,
select the desired number in the "Globals" tab.
5. Select the "Data" tab to configure default values
for the outputs.
Adding Outputs of Type "Analog Arbitrary"
Outputs for arbitrary signals can be used to output user-defined signal patterns
(based on the current angle of the simulated electric motor).
This signal pattern can be used, for example, to simulate specific position sensors
and other variables with a direct relationship to the motor angle.
1. Right-click the "ES5340-Master" item and select
Add Item
.
2. In the list, select the "ES5340-Analog-Out" item
and click
OK
.
The item is added.
Summary of Contents for ES5340.2
