ETAS ES5340.2, User Manual

Page: 67 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 67
ETAS Configuring the Hardware in LABCAR-RTC
6. In the same way, add an "ES5340-Master" item to
the "ES5340-Hybrid" item.
7. Select File
→
Save .
5.1.2 Measuring the Gate Trigger Signals
To measure the PWM control signals for the inverter, you have to add an item for
measuring digital signals.
Adding an "ES5340-Digital-In" Item
1. Right-click the "ES5340-Master" item and select
Add Item .
2. In the list, select the "ES5340-Digital-In" item and
click OK .
The item is added.
Adding an "ES5340-Dig-In-HW" Item
1. Right-click the "ES5340-Digital-In" item and select
Add Item .
Note
Error messages in the monitor window indicate that
the configuration of the hardware is not yet com-
plete.