ETAS ES5340.2, User Manual

Page: 66 / 120

ES5340.2 Electric Drive Simulation Board - User’s Guide 66
Configuring the Hardware in LABCAR-RTC ETAS
5.1 General Settings
This section provides a description of a few basic settings of the hardware con-
figuration.
In particular, they include:
• "Creating an "ES5340-Master" Item" on page 66
• "Adding an "ES5340-Digital-In" Item" on page 67
• "Adding an "ES5340-Dig-In-HW" Item" on page 67
• "Assigning Inverter Gates to Measurement Channels" on page 68
• "Creating an "ES5340-RPM" Item" on page 69
5.1.1 "ES5340-Master" item
Creating an "ES5340-Master" Item
1. In LABCAR-IP, select Project
→
RTIO Editor .
The editor of LABCAR-RTC is opened.
2. Select the "RTPC" system.
3. Right-click and select Add Item .
4. In the selection dialog, select the item "ES5340-
Hybrid".
5. Click OK .
The item is added.