62
www.eta.co.at
External ash removal
Installation
Place the connection flange on the ash bin. The switch
must be actuated in this position. If not, adjust the
switch position. Once the switch is in the correct
position, carefully tighten the screws.
Fig. 9-106: Check actuation
Secure the electric cable with a cable tie. This
prevents inadvertent removal of the protective
switch cap, which could otherwise lead to an electric
shock (230 V).
Fig. 9-107: Secure the electrical cable with a cable tie
Install the panels
Mount the panel over the ash disposal channel.
Fig. 9-108: Cover
