Installation
Heat exchanger ash screws
49
Secure the drive with the spacer bushing, screw and
washer. Mount the screw and washer on the torque
arm.
Fig. 9-45: Securing the drive
Installing the position sensor for the first heat
exchanger ash screw
Mount the position sensor in the bracket and adjust to
a clearance of 3 mm with the nuts.
Fig. 9-46: Position sensor
Attach the cover to the bracket.
Fig. 9-47: Cover
Installing the position sensor for the second heat
exchanger ash screw
Remove the cover from the drive. Mount the position
sensor in the bracket and adjust to a clearance of 3
mm with the nuts.
Fig. 9-48: Position sensor
Attach the cover to the bracket.
Fig. 9-49: Cover
