46
www.eta.co.at
Heat exchanger ash screws
Installation
Installing the second heat exchanger ash screw
Affix the supplied seal around the flange.
Fig. 9-35: Seal
Using four M8 x 16 screws and washers, fasten the
second heat exchanger ash screw hand-tight.
Fig. 9-36: second heat exchanger ash screw
Have a seal ready for the flange on the cross ash
screw trough and fasten the second heat exchanger
ash screw hand-tight on the trough of the cross ash
screw with two nuts and washers.
Fig. 9-37: Seal
Adjust the height of the drive with the levelling
feet to support the heat exchanger ash screw.
Fig. 9-38: Adjusting the levelling feet
