the containers, blender and lid.
Accessories
Food
Max.amount
Time (min)
Speed
Preparation
(mm)
Meat mincer
Beef
2 000 g
3
6
30x30x30
Pork
2 000 g
3
v
. MAINTENANCE (fig. 8 - 10)
Pull out the power plug from the power socket before handling the device in any
way! Do not use abrasive and aggressive cleaning agents!
Meat mincer and including all accessories immediately after use in hot water with
detergent. The plastic parts can be washed in a dishwasher. However, the metal parts
must not be washed in a dishwasher because the detergents may cause them to turn dark
or to rust. Take care that the binding surfaces and the sealing elements are functional.
When cleaning the cutting blade
D2
, work very carefully! Ensure that the cutting blades do
not come into contact with hard objects, which blunt them and reduce the effectiveness.
The interchangeable plate may be easily cleaned with the brush.
After cleaning and drying the parts we recommend that you apply cooking oil to the blades
and the interchangeable plates. For easier cleaning of the meat mincer, fi nish off by
grinding some hard pastry (e.g.
a bread roll, bun
).
The tamper
D11
is hollow; it can be
used to store parts of accessories
D7
,
D8
,
D9
,
D10
pic. 9.
Some foods may stain the accessories in a certain way. This however has no effect on
the operation of the appliance and is not cause for a claim or complaint regarding the
appliance! After some time this staining usually goes away by itself.
Never dry plastic moulded parts above a heat source (e.g.
fire stove, electric/gas stove
).
Store the appliance thoroughly cleaned in a dry, dust-free location that is out of reach of
children and incapacitated persons.
Procedure for replacing a broken cog wheel
Remove the conveyor screw
D1
. Using an appropriate tool (e.g.
a screwdriver
) loosen the
screw. Remove the cog wheel
D13
from the conveyor screw. Place a new cog wheel on
the conveyor screw shaft and fi rmly tighten with a screw (pic. 8).
VI. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi
ed on the product or in the accompanying documentation mean that the used electrical
or electronic products must not be disposed of together with municipal waste. For proper
disposal, hand them over at the special collection places where they will be accepted free
of charge. Suitable disposal of the product can help to maintain valuable natural resources
and to prevent possible negative impacts on the environment and human health, which
could be the possible consequences of improper waste disposal.
Ask for more details at the local authority or at a collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations.
GB
23 / 38
