–
Never insert your fi ngers into the fi lling opening and do not use a fork, knife, spatula,
spoon, etc. Use only the supplied pusher for this purpose.
–
Do not exceed the maximum continuous operating time of the appliance, see table!
–
The appliance is also equipped with a mechanical safety. The cog wheel located on the
conveyor screw is designed to, in the case that bones or kitchen utensils get into the meat
mincer, to break and so prevent causing damage to the motor. If such a situation occurs,
follow the instructions in paragraph
V. MAINTENANCE
.
–
Due to safety it is not possible to change the attachments while the drive unit is in operation.
–
If the funnel is empty, do not leave the extra attachment running.
–
Never use the extra attachment if it is not working properly, if it fell to the ground and got
damaged. In such cases take the extra attachment to a specialized service to check its
safety and proper function.
–
When assembling the extra attachment, follow the instructions for use carefully. In order
to ensure proper functioning, any other way of assembling the extra attachment is not
permissible!
–
Long hair, loose clothes or accessories and jewellery can get caught by the rotating parts
of the extra attachment.
Make sure that your hair, clothes and accessories do not get
into dangerous vicinity to the rotating parts!
–
Before removing the extra attachment from the drive unit, allow the rotating parts to stop
completely.
–
If the processed foods start to stick to the accessories (e.g.
on the blades
), turn off the
appliance and carefully clean the accessories (e.g.
with a spatula
).
–
Only use the appliance with original accessories from the manufacturer.
–
Use this appliance only for the purpose for which it was designed as specifi ed in this
user‘s manual. Never use the appliance for any other purpose.
–
The manufacturer takes no responsibility for damages and injuries caused by the incorrect
use of supplementary machines and accessories (e.g.
ruining of foods, injury, cuts
)
and takes no responsibility arising from the warranty on the appliance in the case that the
above safety notices were not followed.
II
. DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
D
–
Meat mincer
(pic 1)
D1 – Conveyor screw
D8 – Tube for making sausages
D2 – Cutting blade
D9 – Mould
D3 – Interchangeable plate for fine mincing
D10 – Cone
D4 – Interchangeable plate for mid mincing
D11 – Pusher
D5 – Interchangeable plate for coarse mincing D12 – Filling funnel
D6 – Nut
D13 – Cog wheel
D7 – Separator
D14 – Mould holder
D15 – Mould
III. PREPARATION AND USE
Remove all packaging materials, take out the food processor and all accessories. Remove
all adhesive foils, stickers or paper from the food processor and accessories. Before first
use clean the parts that will come in contact with food using warm water with detergent,
thoroughly rinse with clean water and wipe dry, if necessary allow to dry.
GB
19 / 38
