CU-DIN R 4-CH 16 A KNX
CU-DIN R 8-CH 16 A KNX
53 / 54
CU-DIN R 12-CH 16 A KNX
USER MANUAL
6.2.15 Objects “Forced position”
NO Object name
Function
Flags
Data type
12 Output A
Forced position
C R T
EIS1
DPT 1.001
1 bit
This communication object is used to force PWM operation. The value of PWM
can set in ETS.
Table 18. Forced position
7 Product disposal
This device must not be disposed of as unsorted household waste. Used devices
must be disposed of correctly. Contact your local town council for more
information.
8 ESYLUX manufacturer´s guarantee
ESYLUX products are tested in accordance with applicable regulations and
manufactured with the utmost care. The guarantor, ESYLUX Deutschland GmbH,
Postfach 1840, D-22908 Ahrensburg, Germany (for Germany) or the relevant
ESYLUX distributor in your country (visit www.esylux.com for a complete
overview) provides a guarantee against manufacturing/material defects in
ESYLUX devices for a period of three years from the date of manufacture. This
guarantee is independent of your legal rights with respect to the seller of the
device.
The guarantee does not apply to natural wear and tear, changes/interference
caused by environmental factors or damage in transit, nor to damage caused as a
result of failure to follow the user or maintenance instructions and/or as a result
of improper installation. Any illuminants or batteries supplied with the device are
not covered by the guarantee.
The guarantee can only be honoured if the device is sent back with the
invoice/receipt, unchanged, packed and with sufficient postage to the guarantor,
along with a brief description of the fault, as soon as a defect has been
identified. If the guarantee claim proves justified, the guarantor will, within a
reasonable period, either repair the device or replace it. The guarantee does not
cover further claims; in particular, the guarantor will not be liable for damages
resulting from the device’s defectiveness. If the claim is unfounded (e.g.
