ESYLUX COMPACT APC10 DALI-2, User Manual

Page: 26 / 106

MA
01
994
30
0
Configuration
26 / 106
5 Configuration
5.1 APC basics
5.1.1 Broadcast mode
Description
Broadcast mode is the unconfigured factory setting. This enables e.g. a
quick commissioning of a simple lighting system without having to
address bus participants or divide them into groups.
– There are no restrictions in the choice of operating mode.
– All bus participants communicate via a common signal.
– All control gear (lighting) are controlled in the same way.
– All input devices have the same rights. For example, presence detec-
tion of each presence detector instance has the same effect on the
lighting. The same applies to push-button instances, for example.
– Creating a group automatically ends broadcast mode.
App
There are two ways to use the broadcast mode.
a.: Non-addressed operation (during initial commissioning and after
resetting to factory settings)
– It is not necessary to address the bus participants.
– Individual parameterisation of individual bus participants is not pos-
sible.
– Light control is only managed by APC's light sensor. Other light sen-
sors cannot be used.
– Otherwise, only presence detector and push-button inputs are taken
into account.
– The standard push-button functions apply to connected push-but-
tons:
b.: Addressed mode (for quick set-up)
– Addressing bus participants is possible. Broadcast mode is main-
tained even after addressing – provided that no groups are set up.
– After addressing, the input devices can be set up individually.
Short press of the button Switch light on/off
Long press of the button Dim light up/down
Double press of the button Return to the original control