ESYLUX COMPACT APC10 DALI-2, User Manual

Page: 103 / 106

MA
01
994
30
0
EN
APPENDIX
103 / 106
12.2 Glossary
Actuator APC relay for the connection of external components, e.g.:
– 230 V lighting
– HVAC
Address Unique identifier of a bus device (device/instance) in the DALI-2 bus.
APC ESYLUX term for "application controller"
Automatic light control Lighting is controlled to a constant brightness level – depending on the
amount of daylight.
Automatic mode Push-button function: Return to the initial state of the current operating mode
BlueMode ESYLUX term for a special configuration state of the control system
Bluetooth connection Strictly speaking, two different techniques:
– Pairing: initial authentication.
– Connection ("bonding"): for regular data exchange
Bluetooth Low Energy (BLE) Bluetooth technology with low power consumption
BMS here: ESYLUX term for a presence detector
general: abbreviation for building management system
Configure; Parameterise The parameterisation of the devices is a subset of the entire configuration
(devices, groups, scenes, etc.).
Control gear DALI term for the ECG of a light
DALI; DALI-2 Interface standard/ control protocol: DALI for lighting technology, DALI-2 for
building technology; DALI-2 includes DALI
Default setting, factory set-
ting Configuration state at delivery and after resetting the APC
Default value Value of a parameter in the default setting
Device here: DALI-2 component such as APC, control gear, push-button etc.
ECG Control gear of a light
Follow-up time Time between the last presence detection and the next control state
Group Combination of several devices (operating and input devices); can include all
or only specific lights in a room.
HVAC here: Components of heating, ventilation, air-conditioning/ refrigeration tech-
nology
IEC 62386-xxx Series of standards for the concept and components of DALI-2
Instance Sub-component of a device that fulfils its own function (e.g. presence detec-
tion or brightness measurement).
Each instance in the DALI-2 bus can be uniquely addressed via the device and
the instance number.
Light control Alternative to automatic light control: The lighting is switched with a prede-
fined light output.
Manual override (by dim-
ming) Manual brightness setpoint adjustment: If dimming is done manually during
light control, the new brightness value in the room is permanently adopted as
the new brightness setpoint.
Requirement: Push-button for dimming UP/DOWN is defined.