MA
01
994
30
0
Products section
44 / 106
7.2
Bluetooth connection
Description
Configuration of the APC requires a Bluetooth connection between the
app on your mobile device (smartphone or tablet) and the APC.
Requirements
– Bluetooth is activated on the mobile device.
– The APC is supplied with mains voltage and is ready for operation.
– The distance between the mobile device and the APC is max. 10 m
with no obstructions (door, wall, ceiling).
– If possible, the APC is within line of sight so that you can monitor
the LED displays.
If there are several APCs in an installation, stand directly below the
APC concerned if possible.
– For the first connection – during initial commissioning or after rein-
stalling the app: Have the PIN code of the APC ready. The PIN code
can be found on the sticker of the APC.
IMPORTANT: Do not leave the Bluetooth range of max. 10 m while the
connection is being established. This also applies whenever configuring
the APC.
App
• Tap the button ("No connection" shown).
• If a location permission notice appears, grant the appropriate per-
mission.
• The <Bluetooth device overview> screen shows the devices within
range via Bluetooth.
• Tap the line [APC]. If several APCs are displayed in an installation,
select the line [APC] with the highest signal strength.
• When the <Bluetooth pairing request> window appears, enter the
PIN code of the APC.
Summary of Contents for COMPACT APC10 DALI-2
Page 97: ...MA01994300 EN Projects section 97 106 8 Projects section coming soon...
Page 105: ......
