manualshive.com logo in svg

Estate EST-EMTB275, Instruction Manual, Page: 20 / 32

Share
Download
Estate EST-EMTB275 Instruction Manual Download Page 20

20

Charger

The bicycle comes with a smart charger for easy charging.
1. Insert the AC plug into an appropriate electrical outlet.
2. Open the battery cover and insert the DC connector into the battery (Fig. 30).
3. When the battery is charging, the charging light illuminates red (Fig. 31).
4. When the battery is about 80% charged, the charging light turns green. At this 

stage, please charge it for about one more hour, then it will be fully (100%) 
charged and the charger will automatically stop charging (Fig. 31). 

A full charge (from 0% charge to 100%) takes approximately 7.5 hours.

Battery Charging (Cont.)

WARNING!

•  Only use the charger supplied with this bicycle to charge the battery.

  

Do not charge the battery with any other (or universal) charger, doing so will 
void the warranty. Do not use this charger to charge any other bike.

•  Do not leave the battery charging unsupervised. 

07:30

00:00

Fig. 30

Fig. 31

20

AUS

AFTER SALES SUPPORT

MODEL: EST-EMTB275 PRODUCT CODE:  706076   11/2021

1300 112 534

tempo.org/support

Summary of Contents for EST-EMTB275

































Reviews:

No comments