17
Assembly (Cont.)
Step 4: Installing the Pedals
WARNING!
• For safe operation, the pedal spindle must be securely tightened against the
crank arm.
• Always replace damaged pedals, and always wear fully enclosed shoes or
sneakers when riding a bicycle.
1. Look for the letters “R” or “L” stamped on the pedal spindle.
2. To install the pedals, proceed as illustrated below (Fig. 23):
– Thread the pedal marked “R” into the crank arm on the chain side of the bike.
Turn the pedal spindle in a
clockwise
direction. Securely tighten the pedal
spindle with the M15 wrench.
– Thread the pedal marked “L” into the crank arm on the left side of the bike.
Turn the pedal spindle in an
anticlockwise
direction. Securely tighten the
pedal spindle with the M15 wrench.
Torque requirements:
20–26 Nm.
NOTE:
Both pedals should be tightened towards the front of the bicycle. Start
each pedal spindle by hand to avoid stripping the threads.
Fig. 23
17
AUS
AFTER SALES SUPPORT
MODEL: EST-EMTB275 PRODUCT CODE: 706076 11/2021
1300 112 534
tempo.org/support