APPENDIX E
TROUBLESHOOTING
Revised: 19 Jan 16
APX E-2
EST P/N AA107-Horizon
Repeater Peers - The Peer Table will display all connected Horizons configured to repeat to this ESTeem by their
Wireless (WLAN) MAC address.
Received Signal Strength – This is the first of the two numbers listed in the block. This signal strength value is listed in
dBm.
Last RX – This is the time of the last received data packet. When monitoring the status menu, it is important to note the
time the last transmission was updated so you are not looking at “stale” data.
Current Data Rate – This is the current speed the last data packet received by the Horizon. This may not be the data
rate between the radio modems. Note that the speed is listed in kbps, so that 11000 kbps is equal to 11 Mbps.
Note:
The ESTeem Horizon uses spread spectrum technology that analyzes each data packet for signal strength and
data quality (strength vs. noise). The higher your signal, the mare background noise you can sustain without
causing degradation in the data transfer. This is also true for lower signal strengths with a very low background
noise. These values are provided for guidance and if you have any questions about the values in your
application, please contact ESTeem Customer Support at 509-735-9092 or e-mail your application to
Modem ID – This is Modem ID for the opposite repeater peer.
