CHAPTER 6
SERIAL APPLICATIONS
Revised: 19 Jan 16
6-2
EST P/N AA107-Horizon
9.
To set the IP address in the ESTeem Horizon, type the letter “A” and press the Enter key. Enter the value for the
IP address, Netmask and default route pressing the Enter key after each entry.
10.
After the basic parameters have been entered into the Horizon you will need to commit the changes to the Horizon
(Figure 3). Press the C key and then Enter. The changes will be saved to flash memory. You can use
programming features in the ESTeem Web Configuration Manager to configure the unit for your application.
Figure 2: RS-232 Welcome Screen
Figure 3: RS-232 Welcome Screen
