CHAPTER 3
EXAMPLE APPLICATIONS
Revised: 19 Jan 16
3-9
EST P/N AA107-Horizon
Ethernet Bridge Mode Example 1 (Figure 1)
Point to Point Ethernet Bridge
(2) ESTeem Horizon
Serial Numbers: E-14000 (Main Office) and E-14001 (Remote Office)
1. Add the two ESTeem Horizons to the network using the above procedure. Once both ESTeem Horizons are on
the configuration page, create a wireless link
by clinking on one of the two connection
boxes and dragging a line to the other
modem (Figure 13).
5. Verify both ESTeem modems are connected
to the same switch as the computer running
the ENC Utility and send the configuration to
both modems at the same time by selecting
ESTeem>ESTeem Configuration>Send
Configuration to All ESTeems (Figure 14).
6. Once the ENC Utility has downloaded the
configuration for both ESTeem Horizons, the
status box around the ESTeems will change
from yellow to blue. This indicates that the
configuration was completed successfully
and the ESTeem Horizons are ready to be
installed in the application.
Figure 13: Create Wireless Link
Figure 14: Send Configuration to ESTeem’s
