CHAPTER 3
EXAMPLE APPLICATIONS
Revised: 19 Jan 16
3-7
EST P/N AA107-Horizon
PROGRAMMING EXAMPLES
Once the mode of operation for the ESTeem has been
determined, you are now ready to program the Horizon for use.
ESTeem has created a simplified network programming utility call
the ESTeem Network Configuration (ENC) Utility. This ENC
Utility will be used in all the following programming examples. For
detailed instructions on installing the ENC Utility, please refer to
the User’s Guide (found in the ESTeem Resource CD or Utility
program itself) or Chapter 4 of this User’s Manual
Adding Esteem’s to ENC Utility and Changing Name
Each of the example applications will use the following procedure to add and rename ESTeem Horizon’s.
1. Consult the ENC Utility’s User Guide on how the create a new wireless network. Once you have a blank network
configuration page (Figure 9), select ESTeem from the menu items to display the drop down menu, then select
New>New ESTeem.
2. Enter in the ESTeem Horizon serial numbers used for the
example (for example enter E-14000 in the Set Serial Number
Box) and press the OK button (Figure 10). The ENC Utility will
look up the ESTeem Horizon’s serial number in the database
and match the correct Wireless LAN MAC (WLAN MAC)
address to the modem. This WLAN MAC address will be
displayed above the modem symbol on the screen (Figure 11).
Technical Tip
:
The ENC Utility calculates the
wireless link information based upon
exact
ESTeem serial numbers. The serial numbers
listed in the following examples are for example
only. Enter the correct ESTeem serial numbers
for your application.
Figure 9: Adding ESTeem to Blank ENC Configuration Page
Figure 10: Enter the Serial Number
