CHAPTER 4
UTILITIES & FEATURES
Revised: 19 Jan 16
4-3
EST P/N AA107-Horizon
Note: This program is saved in a compressed file format.
3. Double click on the 195EDiscoverySetup<Current Version>.exe file listed in the window to install the program.
4. Connect the Model 195E to your computer either directly to the Ethernet card or through a HUB/Switch using a
CAT-5e Ethernet cable. The Ethernet port on the 195E supports Auto-Negotiation, so either a patch cable or
crossover cable will work. Open the ESTeem Discovery Program and press the Discover Modems button. The
Model 195E will be displayed in the program by the Ethernet MAC address and Current IP Address (Figure 4).
Note: The SSID, Mode of Operation and Modem ID will be adjusted through the ENC Utility or the Web
Configuration Manager...
5. Double-click on the 195E you want to program and the
Configure IP Address
window will be displayed (Figure 5).
Enter an IP address and Subnet Mask for the 195E that matches your network subnet and press the OK button to
save this to the ESTeem. You will receive notification that the Configuration was Successful and the 195E will
reboot.
Figure 4: Discovery Program Main Page
Figure 5: Change IP Address Window
