CHAPTER 8
ANTENNA SETUPS
Revised: 10 Mar 16
8-1
EST P/N AA107-Horizon
216An ANTENNA AND CABLE CONFIGURATIONS (POLE MOUNT)
ESTeem offers different types of antennas for both indoor and outdoor configurations. To reduce potential radio
interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that permitted for successful communication.
This radio transmitter ESTeem 216An has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna
types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited
for use with this device.
Le present emetteur radio ESTeem 216An a ete approuve par Industrie Canada pour fonctionner avec les types
d'antenne enumeres ci-dessous et ayant un gain admissible maximal et l'impedance requise pour chaque type
d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est superieur au gain maximal indique, sont
strictement interdits pour l'exploitation de l'emetteur.
Warning: Only the tested cable lengths and antennas provided by EST meet the FCC maximum peak output
power requirements. Any other combination of antennas or coax cables is not authorized. This
device has been designed to operate in a pole mount configuration with the antennas listed below,
having a maximum gain of 6 dB in a multi-point system or 15dB in a point to point network. Antennas
not included in this list or having a gain greater 6 dB in a multi-point system or 15dB in a point to
point network are strictly prohibited for use with this device. The required antenna impedance is 50
ohms.
Part Number: AA20DMEg
Omni-directional direct mount antenna, 5 dBi gain.
Indoor and outdoor applications.
There must be a minimum separation distance of
24 cm. from the antenna to the user.
See Warnings.
Part Number: AA203Eg
Directional pole mount antenna, 6 dBi gain with 3-
ft. integral feedline and connector.
Point to point and point to multi-point outdoor
applications.
Antenna port B is not used in this configuration.
There must be a minimum separation distance of
24 cm. from the antenna to the user.
See Warnings.
Part Number: AA204Eg.1
Directional pole mount antenna, 15 dBi gain with
3-ft. integral feedline and connector.
Point to point applications only.
Maximum Output Power of 250mWatts (Power
Level = Low Power)
Antenna port B is not used in this configuration.
There must be a minimum separation distance of
50 cm. from the antenna to the user.
See Warnings.
Transmit/Receive
Antenna Port 1
Receive Only
Antenna Port 2
Warnings:
Only pre-made coax cables from the factory used in
conjunction with either the AA203Eg or AA204Eg.1
directional antennas meet all FCC Section 15.247(b)
EIRP maximum power requirements.
Use of the AA204Eg.1, directional antenna is limited to
fixed point to point applications only. In accordance FCC
Section 15.247(b)iii, this antenna must be professionally
installed. The installer must ensure the system is used
exclusively for fixed, point-to-point applications and the
ESTeem Horizon is set for 0.25 Watts output power
(Power Level = Min).
