manualshive.com logo in svg

Essilor Mr Blue 2.0, User Manual, Page: 25 / 152

Share
Download
Essilor Mr Blue 2.0 User Manual Download Page 25

USER MANUAL > TRACING

Mr Blue 2.0 > v4.0 -09.16

25

6

5

4

3

Press 

 to select the job list.

Press 

 to select the collection list.

For  further  information  on  the  lists,  refer  to  the  section 

Tracing  >  Managing  and  storing  shapes  >  Job  list  and

.

collection list 

(p.24)

Press 

 to enter the

 of the new job.

ID

(p.148)

An  ID  is  automatically  allocated  by  the  tracer  (first  free  slot  in  the  selected  list).  You  can  modify  it:  the  ID  can  consist  of
alphanumeric characters.

In the collection list, the ID solely consists of numeric characters.

Press 

 to enter the reference of the new job.

Irrespective of the list selected, the reference may consist of alphanumeric characters. It can contain the information
of your choice:

Customer's name

Frame brand or reference

Manufacturer, etc.

Press 

 to confirm.

Job list:

Collection list:

The tracer is ready for tracing. For further information, refer to the section concerning your frame type.

The symbol

is displayed is the upper right of the job ID if the right lens has been blocked but not the left.

If you don't want to save the job, you can work in current job mode. For more information, refer to the following section 

Tracing >

.

Shape management and storage > Working in current job mode (job A) 

(p.25)

Successive tracings and saving.

If you start a new tracing while a job is still active on the tracing screen, a message is displayed:

Replacement of the active shape: the tracing you have just started replaces the former one under the current ID.

Creation of a new job: the alphanumeric keypad is displayed to enable you to create a new job for the tracing you have

just started (new ID). The two jobs are thus saved.

To cancel, press again on 

.

d. Working in current job mode (job A)

As soon as the tracer is initialised, you can work in current job mode: the letter A is displayed by default in the information
bar. The job is not saved.

The  tracing  screen  is  displayed.  The  ID  allocated  and  the  symbol  of  the  list  in  which  the  job  is  stored  appear  in  the
information bar.

>

The symbol 

 is displayed at the bottom right of the job ID as soon as the job is being modified. It disappears once the

job has been saved.

>

Summary of Contents for Mr Blue 2.0

























































































































































Reviews:

No comments