manualshive.com logo in svg

Essilor Mr Blue 2.0, User Manual, Page: 23 / 152

Share
Download
Essilor Mr Blue 2.0 User Manual Download Page 23

USER MANUAL > TRACING

Mr Blue 2.0 > v4.0 -09.16

23

1.

2.

3.

4.

5.

6.

7.

8.

9.

Sort the jobs

ID

(p.148)

Reference

Date

Types of jobs:

Drilled

Asymmetric tracings

Creative shapes/engravings: 

creative shape, 

 shape with engraving

Selected job

Shape preview

Select the eye to be displayed in the preview

In monocular tracing mode, the eye just traced is displayed by default.

Information concerning the lens shape and frame

A, B and D dimensions

Frame base

Curve angle

Material of the frame / pattern / demo lens or recut lens

Job counter for the selected list

Back to the default display of the selected list

Display all jobs starting with the selected letter

To display the all jobs starting with the selected letter:

Press once if it is in the first position on the button,

Press twice in succession if it is in the second position,

Press three times in succession if it is in the third position.

Example:

Press 3 times on the

button to display all jobs starting with the letter R.

> The R goes into upper case:

.

> The jobs starting with the letter R are displayed.

Select several jobs

Press 

 to select several non-consecutive jobs in the list.

Example: Press on the button then select jobs #1, #5, #7.

Summary of Contents for Mr Blue 2.0

























































































































































Reviews:

No comments