manualshive.com logo in svg

Essilor Mr Blue 2.0, User Manual

Discover the Essilor Mr Blue 2.0, a revolutionary precision lens edger. Maximize its potential by downloading the user manual from our website, absolutely free. Unlock the power of this cutting-edge device and achieve unparalleled accuracy in lens production. Don't miss your chance to enhance your workflow with this essential manual.

Share
Download
background image

USER MANUAL > GENERAL INFORMATION

144

Mr Blue 2.0 > v4.0 -09.16

Description of the symbols 

(p.144)

Modifications 

(p.144)

Compliance 

(p.144)

Copyright 

(p.144)

Materials and products 

(p.144)

Security 

(p.145)

Electromagnetic waves 

(p.145)

License agreement for M’EYE Sign™ (Engraving) software 

(p.145)

Symbols

SYMBOLS PRESENT ON THE DIGITAL SYSTEM

O

Off (power)

I

On (power)

D.C. current

Caution: risk of electric shock

Caution: danger, refer to the user manual

SYMBOLS PRESENT IN THE DOCUMENT

Danger: risk of injury

Caution: risk of damage for the machine or the lens

Note: additional information

Tip: practical advice for use

Glossary: indicates a word defined in the glossary

See also: indicates the page number to consult for further
information

Modifications

The information contained in this document is non-contractual and provided as a guide. It is subject to change without prior notice. Errors or omissions may occur in this
type of document, although the greatest care has been taken to ensure the accuracy of the information provided. Essilor cannot be held responsible for any malfunction or
loss of data resulting from such errors or omissions.

Declaration of conformity

Complies with marking: 

Complies with ISO 16284 standards, IEC 61010-1 and IEC 61326-1 and with directives 200/42/CE, 2014/30/UE, 2014/35/UE.
This equipment complies with the limits imposed by Part 15 of the FCC rule. Its use meets the following conditions: (1) this device must not cause interference and (2)
must accept interference from external sources, notably that liable to cause malfunctions.

In accordance with the requirements of FCC rules, any modification made to this equipment which is not expressly approved by ESSILOR INTERNATIONAL would nullify
the user's right to use this device.
This equipment has been tested and is deemed compliant with the limits imposed for Class-B digital devices according to Part 15 of the FCC rule. Those limits are set so
as  to  ensure  reasonable  protection  against  interference  in  a  residential  environment.  This  equipment  generates,  uses  and  may  emit  radiofrequency  energy  liable  to
interfere with radio communications if the device is not installed and used in strict compliance with manufacturer instructions. However, nothing guarantees the absence of
interference under particular conditions. If this equipment is the source of interference with radio or television reception (this can be confirmed by switching off the device
then turning it back on), the user may be able to eliminate this interference through one or more of the following measures:

Swivel of move the affected receiver or its receiving antenna;

Move the device away from the affected receiver;

Connect the device to a different circuit to that powering the affected receiver;

Request help from the retailer or a qualified radio / television technician.

Copyright

Copyright © 2016 Essilor - Original manual

All rights reserved. All reproduction of the content of this document, whether in part or as a whole, for the purpose of its publication or dissemination by any means and in
any format whatsoever, even free of charge, is strictly prohibited without Essilor's prior written consent.

Materials and products

Do not place this machine in a dusty environment, in a room where the temperature is too high or too low, or in a wet place.

EurAsia Conformity : 

Summary of Contents for Mr Blue 2.0

























































































































































Reviews:

No comments

Related manuals for Mr Blue 2.0

Clarke Super 7R Edger 07013A Operator'S Manual preview
Super 7R Edger 07013A
Brand: Clarke Pages: 40
Clarke American Sanders 07072A Operator'S Manual preview
American Sanders 07072A
Brand: Clarke Pages: 81
Nidek Medical ME 1200 Installation Instructions Manual preview
ME 1200
Brand: Nidek Medical Pages: 60

Brands by name

Popular brands

Load more brands