Essilor Mr Blue 2.0 Page 128 User Manual Download

Page: 128 / 152

USER MANUAL > MAINTENANCE & SERVICING

128

Mr Blue 2.0 > v4.0 -09.16

a previously created backup

the jobs and configuration of another Mr. Blue 2.0 tracer.

Connect the backup USB key to the tracer.

From your work screen select

Press

to import the data present on the backup key.

Click on

to import a display customization:

If several backups are present on the key, take care to choose the one you want to restore.

Check the product serial number and the date and time of backup.

Press

to start the operation.

Remove the USB key.

4. “Remote control” Function

As part of a maintenance operation, your technical correspondent can remotely control your machine.

Check the tracer’s connection to the Internet

Press

The backup screen is displayed.

A message is displayed asking you to remove the USB key.

The product restarts with the selected configuration.

To import on the tracer:

Summary of Contents for Mr Blue 2.0

























































































































































Search results

Summary of Contents for Mr Blue 2.0

Reviews:

Related manuals for Mr Blue 2.0

Brands by name

Popular brands

Essilor Mr Blue 2.0, User Manual

Search results

Summary of Contents for Mr Blue 2.0

Reviews:

Related manuals for Mr Blue 2.0

Brands by name

Popular brands