ESPEC LH-113 User Manual Download

Page: 85 / 110

Chapter 6 Checks and Maintenance

1. Open the cabinet door.

2. Lift the protective grille outwards from the bottom and then upwards

to detach.

②

①

Fig. 6.5 How to detach the protective grille

3. Clean the surfaces of the humidifying tray and humidifying heater with

a brush or by other means.

4. Reattach the grille and close the cabinet door.

Test Area Cleaning

Dirt and foreign matter inside the test area can throw test results off.

Clean the test area before every test.

1. Open the cabinet door.

2. Wipe walls and parts clean with a soft cloth.

3. Close the door.

Water Circuit (Heat Exhaust) Compartment Cleaning

Dust buildup inside the water circuit (heat exhaust) compartment can

lead to trouble. Clean inside the compartment once a month.

1. Check the main power switch is in the OFF position.

The water circuit (heat exhaust) compartment has a ventilation fan on

the inside. Contact would be dangerous. Always shut OFF power at

the main power switch before opening the water circuit (heat exhaust)

compartment.

Procedure

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for LH-113















































































































Search results

Summary of Contents for LH-113

Reviews:

Related manuals for LH-113

Brands by name

Popular brands

ESPEC LH-113, User Manual

Search results

Summary of Contents for LH-113

Reviews:

Related manuals for LH-113

Brands by name

Popular brands