Appendix
102
Program edit task selection
EDIT/CLEAR
Program setup
ENT key (To select "EDIT")
Program edit
task selection
EDIT/
CLER
16
Entering "CLER" clears the
entire program.
Step edit content selection
STEP/END/SAVE
Step edit
content
selection
STEP/
END/
SAVE
17
If entering "END", move to *28.
Entering "SAVE" saves the program.
Step selection
Step
selection
Max.
9 steps
18
Temperature (and Humidity) link
control status ON/OFF
Temperature
(humidity)
control
OFF/ON
19
Target temperature
Target
temperature
Target
humidity
20
Setup exposure time
Setup
exposure time
0.00 99.59
100 999
23
Soak control status ON/OFF
Soak control
(Settable only
when *25 is
OFF)
OFF/ON
24
Temperature ramp control
ON/OFF
Temperature
ramp control
(Settable only
when *24 is OFF)
OFF/ON
25
Humidity ramp control ON/OFF
Temperature
ramp control
(Settable only
when *25 is OFF)
OFF/ON
26
Number of repeat cycles
Number of
repeat cycles
0 ~ 99
28
Repeat counter start step
Repeat
counter start
step 1 ~ 9
Displayed
only when *28
is other then
"0"
29
Repeat counter end step
Repeat
counter end
step 1 ~ 9
Displayed only
when *28 is
other than "0"
30
End mode HOLD/OFF/CNST
End mode
HOLD/
OFF/
CNST
31
Step data enter command
YES/NO
Step data
enter command
YES/NO
27
Humidity control ON/OFF
Humidity
control
OFF/ON
21
Target humidity
23 Setup exposure time
17 Step edit content selection
17 Step edit content selection
Target
temperature
Target
humidity
22
ENT key (To select "STEP")
NEXT
key
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
Set with and keys.
Enter with .
ENT.
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
PRGM SET
h. min.
*16
The instant "CLER" is entered, the entire program is cleared. If "CLER" is entered
while a program is running, "EDIT ERR" appears on the display and the program
is not cleared.
Unless "EDIT" is entered for *16, program setup does not advance to *17.
*17
If entering "STEP," move to *18. If entering "STEP", move to *16. If entering
"END", move to *28. Entering "SAVE" saves all steps entered up to that point.
However, "EDIT ERR" appears on the display if the program contains no data or
steps, if that program is currently running, if repeat counter start and end steps
are backwards or if the program has too many steps.
*18
Selects the step where data is entered. However, step No. must be one higher
than the last step. Unless data is input into the program, the step No. remains as
the default "1" and cannot be changed.
*19
If turned OFF, the step is based entirely on exposure time and not at all on
temperature (humidity) control. Also, the display skips over *20 *22 and *24
*26.
*20
With LU cabinet, humidity figures and %RH are not displayed.
Also, "OFF" is displayed when humidity control is OFF.
*21, 22 With LU cabinet, the display skips over these items.
*23
The min. lamp does not appear for exposure time settings over 100 hours.
*24
The display skips over this item if temperature ramp or humidity ramp control is
ON.
*25, 26 The display skips over these items if soak control is ON.
Also, *26 is displayed only with temperature-humidity cabinet.
*27
Entering "YES" enters step data.
*29, 30 Displayed only when *28 is other than "0".
Alarm Setup Mode
ENT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
NEXT
key
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com