ESPEC LH-113 User Manual Download

Page: 25 / 110

Chapter 3 Installation

3.2 Removing Shipping Protection (LU

cabinets excluded)

The cabinet is shipped with protective sponges inside the wick pan water

supplier and humidifying tray water level regulator. These sponges

prevent the floats from being damaged during transport. Before

performing power supply work, remove the sponges. If left inside the

cabinet, they can absorb water and moisture and provoke leaks.

1. Detach the water circuit compartment panel.

2. Carefully open the lids to the wick pan water supplier and humidifying

tray water level regulator. Then, remove the sponges inside.

Wick pan water supplier

Water circuit
compartment panel

Lid

Sponge

Float

Humidifying tray water level
regulator

Procedure

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for LH-113















































































































Search results

Summary of Contents for LH-113

Reviews:

Related manuals for LH-113

Brands by name

Popular brands

ESPEC LH-113, User Manual

Search results

Summary of Contents for LH-113

Reviews:

Related manuals for LH-113

Brands by name

Popular brands