Appendix V: Address discovery at the remote site
Remote IP Feature Phone Installation Manual
L.2
If the NAT router is already in place and you have no documentation for it, and a PC is already configured
to use the NAT router, the following steps will help you gather the needed IP addresses.
Checking existing address information
Important:
The procedure shown below is for use within
Windows
95 and 98. However, if you’re using
Windows NT,
Windows 2000
or
Windows XP
:
1. Click on the
Windows
Start
button and select
Run
. The
Run
window will appear.
2. Type
command
and click on
OK
. This will open a DOS window.
3. Type
ipconfig /all
and press
Enter
.
This provides the same information as the
Windows 9x
procedure shown below, except that the
information appears within a DOS window.
1.
Click on the
Start
button and select
Run
. The
Run
window will appear.
2.
Type
winipcfg
and click on
OK
. The
IP Configuration
window will appear:
3.
Choose the
Ethernet adapter
in the dropdown box:
