Programming the IP PBX and Remote IP Feature Phone
Remote IP Feature Phone Installation Manual
C.2
2.
Now
, connect the Remote IP Feature Phone to the local network. The phone should connect to the
network and become operational.
3. The Function 31 parameters now need to be downloaded to the phone. Repeating the Function 31
programming steps does this. Enter the extension number and press
#
. You don’t have to
re-enter
the rest of the parameters; just push
#
to
confirm
each parameter. Then, when you exit Function 31,
the parameters will be sent to the Remote IP Feature Phone.
The phone is now ready for installation at the remote site.
The process described here requires that the programming of the IP PBX and Remote IP Feature Phone
be performed at the main office before installing the phone at the remote site.
Esi-Tools
includes two
software tools,
Esi-Access
and
Esi-Address
, that can be used to minimize the amount of travel required to
install a Remote IP Feature Phone. This will be very useful in cases wherein the remote site is far from the
main office. Use
Esi-Access
to connect remotely to the main office IP PBX for programming in Functions 31
and 821; use
Esi-Address
to download the addressing information to the Remote IP Feature Phone.
Refer to each software tool’s respective
User’s Guide
for instructions.
