18
19
3. Setting options
Acoustic signal setting:
- The acustic signals are set via the pushbuttons behind the forend:
The acoustic signal can be switched on and off. “Off” is preset. To change the status, actuate the pushbutton
1 x briefly. The confirmation of the adjustments takes place through an acoustic double signal.
Permanently unlocked function
- The permanently unlocked function can be switched on and off. “off” is preset. The motorised lock case
is only approved in this delivery condition for fire and smoke doors. To change the status, actuate the
pushbutton 1 x longer, until the second signal is sounded. The confirmation of the adjustments takes place
through an acoustic double signal. The newly adjusted state must be checked subsequently. For this, the
respective input must be energised permanently. Also see the warning below.
Adjusting the unlocking period:
- The unlocking period can be adjusted. 4 seconds are preset. After this period, the latch and bolt ejectors
as well as the locking rods (in case of double leaf unlocking) are released again (The locking rods are
now being held by the switch lock). To adjust the unlocking period, the pushbutton must be kept actuated for
the desired period of time (at least 3 seconds). An acoustic signal is sounded for each second held. The
change is confirmed by the sounding of a double signal. You have the option to set durations between
3 and 255 seconds.
Disposal
Since the motorised module
systeQ765M contains electronic
components, it must be disposed
of separately.
Warning notes:
The motor unit is delivered with the permanently
unlocked function switched off. Only in this state
the product is approved for fire and smoke protection.
If the permanently unlocked function switched on,
the motorised lock case should not be installed in
fire doors or smoke doors. Fire doors or smoke
doors must be self-locking. This is not the case if the
permanently unlocked function is switched on. The
lockable latch cannot engage in the lock case forend.
Fire doors or smoke doors must be self-locking.
This is not the case if the permanently unlocked
function is switched on.
As soon as the lock has been connected correctly and
is operational, this is signalled by a green LED visible lit
in the lock’s forend.
Adjustment options via the
pushbuttons. The centre blind
forend must be removed, which
is covering the adjustment
opening.
Summary of Contents for systeQ-S 765M
Page 10: ...10...
Page 20: ...70 40 564 01 01 19...