14
15
Inputs:
- Open, single leaf (wire optocoupler input against „chassis“ ground)
- Open, dual-leaf (wire optocoupler input against „chassis ground“)
Outputs:
- Single leaf open (open collector, max. 30V, 0.1A switches against „chassis ground“)
- Dual-leaf open (open collector, max. 30V, 0.1A switches against „chassis ground“)
- Malfunction (open collector, max. 30V, 0.1A switches against „chassis ground“)
The power supply may only be performed by an electrical engineering specialist. When
connecting to 230V, there is danger of life. The power supply unit must be a power source
with limited output in accordance with EN60950. The output current must not exceed 5A.
Electrical and electronic components comply with the CE standards CE compliance in
accordance with 2014/30/EU EN 61000-6-1 EMC basic standard for immunity to interference
EN 61000-6-3 EMC basic standard for emitted interference EN 60950 Device safety.
1.5 Technical data
Nominal voltage:
24V
Power consumption:
4A max.
Stand-by:
50mA
Inputs:
optically decoupled
Outputs:
Open collector max. 30V, 0.1A
Cable diameter:
6.5mm
Cable type:
LIYY 14x0.14 mm²
Cable length:
10m
Coupling function:
Operating current, currentlessly decoupled
Unlocking period:
4s pre-set, adjustable
Acoustic signal function:
switchable
Interface:
RS 485 optional
A power supply is necessary, 24V/DC 100W, regulated.
The maximum cable length (system cable) from the lock to the junction box must not exceed 10m.
Otherwise, the cable diameters must be adjusted to avoid a drop in voltage.
Summary of Contents for systeQ-S 765M
Page 10: ...10...
Page 20: ...70 40 564 01 01 19...