![background image](http://html.mh-extra.com/html/altelix/hn-0006/hn-0006_installation-manual_2910736001.webp)
The HN-0006 comes pre-configured for use in the NS series enclosure. The
second lock cam included is not needed for this installation.
Step 1
Remove the existing latch by removing the retaining nut.
HN-0006 Installation Guide
Page-1
Page-4
IS0158 Rev A 01/27/20
Altelix LLC USA: 866-660-WIFI (9434) International: +1 561-660-9434 [email protected] www.altelix.com
Copyright (C) 2017 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See
www.altelix.com
for most current information
The HN-0006 is for use with Altelix NS series and NFC series enclosures. It is a
direct replacement for the standard latch included with these enclosures.
Padlock Latch with Retaining Nut
and Lock Cam for use with NS
Series enclosures
Handle Padlock Latch for NS/NFC Series Enclosures
Got Questions?
We are here to help.
Contact us at:
USA & Canada Customers: 866-660-9434
International Customers: +1 561-660-9434
What’s In The Bag?
Lock Cam for use with NFC Series
enclosures.
NS Series Steel Enclosure Installation
Remove Retaining Nut
Securing the Enclosure
Turn the Padlock Latch until the enclosure door is securely closed. Then
attach a padlock (not included) as shown.
The HN-0006 will accept padlocks with shackles/shanks ranging from 6mm
to 8mm in diameter.
Also available to secure the NS and NFC series
enclosure is the HN-0005 Keyed Lock Set. For
more information visit www.ALTELIX.com
HN-0005 Keyed Lock Set
HN-0006 Installation Guide