Guidance
CLE-200
ELCOM-Türsprechanlagen
R
Hauskommunikation für Ihre Sicherheit
Zeichnungsnummer:
AN CLE-200
edition 04.04.2003
Code-Lock for mounting
description:
Technical Dates:
Signal tones:
Operating voltage:
12V AC or 15V DC
Power input:
standby: ca. 10mA
active: max. 70mA
Switching contacts:
floating (max. 24V / 1A)
Key acknowledge:
tüüt
(0,2 sec)
input OK:
tüüüüüüüüüüüüt (1sec)
input false:
tüüt....tüüt....tüüt (6x)
Alarm:
tüüt....tüüt....tüüt (60 sec)
The CLE-200 is a code lock system with two independent switching contacts, which are steered via different
codes (1…8-digit). The active duration may be adjusted individually between 1-99 seconds. Alternatively a
switch-mode can be realized, which switches on the contact after the first manual code input and switches it off
after the second manual code input. If incorrect codes are entered, then the code lock system blocks the
function after the fifth wrong input for 60 seconds and indicates this by an signal tone.
Each further wrong input again releases the blockage and the signal tone for further 60 seconds.
All attitudes of the code lock are made via the keyboard and are protected by a master code against
manipulations.
Wire attach:
Wire solve:
insert wire (massive wire
0,4-0,8mm)
operate orange latch-key
and pull wire out.
Ø
1
2
12V~
(max. 24V/1A)
(max. 24V/1A)
21,5
3,5 +/-10%
Sealing foil
66,7
76,7
86,7
100
4
5,5
88
109
