1
Installation Instructions for
Wi-Q™ Technology 45HQ Mortise Locks
Contents
These installation instructions describe how to install
your 45HQ Mortise Lock. Topics covered include:
Preparing the door
........................................................1
Configuring and installing the mortise case
..............3
Installing the trim
...........................................................4
Completing the installation
..........................................9
Patents
Products covered by one or more of the following patents:
6,720,861
1
Identify holes to drill
1 Determine the lock function to be installed.
Caution:
Determine the inside and outside, hand,
and bevel of the door.
2 See
the
Holes by Function
table and Figure 1 to deter-
mine the holes to be drilled for the lock function.
Functions
DV
TV
Holes by Function
Holes to drill
I/S O/S I/S O/S
A
Forged trim
(2 holes)
†
Through
door
Through
door
B
Harness
†
Through
door
Through
door
C
Standard cylinder
■
■
D
Sensor & motor wire
(2 holes)
■
■
F
Thumb turn
■
G
Trim mounting (2 holes)
‡
†
Determine trim holes based on trim type.
‡
Because these holes pass through the mortise
pocket, it is recommended that each hole be drilled
separately rather than straight through.
Through
door
Through
door
H
Lever
††
Through
door
Through
door
J
Door sensing channel (2
holes)
DO NOT
DRILL
See Figure
1
B
J
B
A
C
F
H
D
D
G
G
J
J
A
Figure 1
Identifying holes to drill
For hole sizes, see
the
Q06 Template
(T82606).
BEST
a Product Group of
d
ormakaba USA Inc.
