Dormakaba SVA 2000, Mounting Instructions

Page: 1 / 20

EN
SVA door locks
Mounting instructions
WN 059743 45532/14377
2019-07
Contents
1 Information about this document 2
1.1 Contents and purpose 2
1.2 Target group 2
1.3 Other applicable documents 2
1.4 Abbreviations 2
1.5 Symbols used 2
1.5.1 Hazard categories 2
1.5.2 More symbols 2
2 Safety 3
2.1 Intended use 3
2.2 Not intended use 3
2.3 Limitations on use 3
3 Product description 4
3.1 Installation situation 4
3.1.1 Mechanical opening 4
3.1.2 Automatic opening 4
3.2 Technical information 5
3.3 Variants 5
3.5 Overview 6
3.5.1 Tubular frame locks 6
3.5.2 Solid door locks 6
3.4 Classification 7
3.4.1 Tubular frame locks 7
3.4.2 Solid door locks 7
3.6 Tubular frame locks 8
3.6.1 Parts included 8
3.6.2 Lock dimensions 8
3.7 Solid door locks 9
3.7.1 Parts included 9
3.7.2 Lock dimensions 9
3.7.3 Door versions 9
4 Mounting 10
4.1 Safety during mounting 10
4.2 Requirements for mounting 10
4.3 Tools and auxiliary materials 10
4.4 Preparatory work 11
4.4.1 Mill-cut and drill door leaf for tubular
frame locks
11
4.4.2 Mill-cut and drill the door leaf for solid
door locks
12
4.5 Mount locks 13
4.5.1 Mount tubular frame lock 13
4.5.2 Mount solid door lock 14
5 Parameterization (SVA 2000/2000F only) 15
5.1 LED display 15
5.2 Adjustable parameters 15
5.2.1 Operation mode 15
5.2.2 Bus address 15
5.2.3 Terminating resistor 15
5.3 Default settings 15
5.4 Display at system start 15
5.5 Change parameters 15
5.5.1 Requirements 15
5.6 Parameterization 16
5.6.1 Set for DCW® bus 17
5.6.2 Set for CAN bus 17
5.6.3 Set for Stand Alone operation 17
5.6.4 Jump back to the selection 17
5.6.5 Cancel parameterization 17
6 SVA 2000F integrated Power Reserve module
test
17
7 Pin assignment 18
7.1 SVA 2000(F) 18
7.2 Smoke detector 19
8 Complete mounting 19
9 Error messages 20
10 Maintenance 20
11 Disassembly and disposal 20