Directions for HIT-32AL3 Drill Guide
For Alarm Lock DL1200 Trilogy
1825 Via Burton
Anaheim, CA 92806
714-772-5202 / fax 714-772-2302
www.majormfg.com
[email protected]
Aluminum door
frame with
dead latch in-
stalled.
Remove faceplate
and all inside and
outside hardware
Alignment for the
drill guide is
achieved with the
use of our HIT-22
mortise cylinder
alignment tool.
This devise will
mount in the
mortise cylinder
hole.
Hit-22 installed
and held in place
with the mortise
cylinder set
screw. Note:
Alignment pin
shown in guide,
this will first go
through the HIT-
32 drill guide
then into the
HIT-22.
Fig 1
Fig 4
Fig 3
Fig 2
Summary of Contents for DL1200 Trilogy
Page 3: ...Completed installation...
