1 SAFETY
0463 766 001
- 4 -
© ESAB AB 2021
1
SAFETY
1.1
Meaning of symbols
As used throughout this manual: Means Attention! Be Alert!
1.2
Safety precautions
WARNING!
These Safety Precautions are for your protection. They summarise precautionary
information from the references listed in Additional Safety Information section. Before
performing any installation or operating procedures, be sure to read and follow the safety
precautions listed below as well as all other manuals, material safety data sheets, labels,
etc. Failure to observe Safety Precautions can result in injury or death.
PROTECT YOURSELF AND OTHERS
Some welding, cutting and gouging processes are noisy and require ear
protection. The arc, like the sun, emits ultraviolet (UV) and other radiation and
can injure skin and eyes. Hot metal can cause burns. Training in the proper use
of the processes and equipment is essential to prevent accidents. Therefore:
1. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when
welding or watching.
2. Always wear safety glasses with side shields in any work area, even if welding helmets face
shields and goggles are also required.
3. Use a face shield fitted with the correct filter and cover plates to protect your eyes, face, neck and
ears from sparks and rays of the arc when operating or observing operations. Warn bystanders
not to watch the arc and not to expose themselves to the rays of the electric-arc or hot metal.
4. Wear flameproof gauntlet type gloves, heavy long-sleeve shirt, cuff less trousers, high-topped
shoes and a welding helmet or cap for protection, to protect against arc rays and hot sparks or hot
metal. A flameproof apron may also be desirable as protection against radiated heat and sparks.
5. Hot sparks or metal can lodge in rolled up sleeves, trouser cuffs, or pockets. Sleeves and collars
should be kept buttoned and open pockets eliminated from the front of clothing.
6. Protect other personnel from arc rays and hot sparks with a suitable non-flammable partition or
curtains.
7. Use goggles over safety glasses when chipping slag or grinding. Chipped slag maybe hot and
can fly far. Bystanders should also wear goggles over safety glasses.
DANGER!
Means immediate hazards which, if not avoided, will result in immediate, serious
personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of life.
CAUTION!
Means hazards which could result in minor personal injury.
WARNING!
Before use, read and understand the instruction manual and
follow all labels, employer´s safety practices and Safety Data
Sheets (SDSs).
