1 SAFETY
0463 766 001
- 9 -
© ESAB AB 2021
1.3
User responsibility
Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who works on
or near the equipment observes all the relevant safety precautions. Safety precautions must meet
the requirements that apply to this type of equipment. The following recommendations should be
observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. Incorrect operation of the equipment may lead to hazardous situations which can
result in injury to the operator and damage to the equipment.
1. Anyone who uses the equipment must be familiar with:
•
its operation
•
location of emergency stops
•
its function
•
relevant safety precautions
•
welding and cutting or other applicable operation of the equipment
2. The operator must ensure that:
•
no unauthorised person is stationed within the working area of the equipment when it is
started up
•
no-one is unprotected when the arc is struck or work is started with the equipment
3. The workplace must:
•
be suitable for the purpose
•
be free from drafts
4. Personal safety equipment:
•
Always wear recommended personal safety equipment, such as safety
glasses, flame-proof clothing, safety gloves
•
Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which could
become trapped or cause burns
5. General precautions:
•
Make sure the return cable is connected securely
•
Work on high voltage equipment may only be carried out by a qualified electrician
•
Appropriate fire extinguishing equipment must be clearly marked and close at hand
•
Lubrication and maintenance must
not
be carried out on the equipment during
operation
WARNING!
Wire feeders are intended to be used in GMAW (MIG/MAG) mode only.
If used in any other welding mode, such as SMAW (MMA), the welding cable between
wire feeder and power source must be disconnected, or else the wire feeder becomes
live or energized.
If equipped with ESAB cooler
Use ESAB approved coolant only. Non-approved coolant might damage the equipment and
jeopardize product safety. In case of such damage, all warranty undertakings from ESAB cease
to apply.
Recommended ESAB coolant ordering number: 0465 720 002.
For ordering information, see the "ACCESSORIES" chapter in the instruction manual.
WARNING!
Arc welding and cutting can be injurious to yourself and others. Take precautions when
welding and cutting.
