ESAB ESP-101, Instruction Manual

Page: 28 / 292

28
B. Mounting the remote Junction Box (rJB)
1. With the cover removed from the Remote Junction Box, mount the base to a rigid location on the cut-
ting machine, robot, or other suitable object, using at least 2 of the provided mounting holes. Orient
the box such that the Extension Cable will enter the end of the RJB
not marked
for torch connection.
SECTIoN 3 INSTallaTIoN
c. Re-route the Input Air Hose over to the output side.
d. Couple the free ends of the gas tubes together using the provided union.
Remote Junction Box
Torch and Extension Cable Openings
(typical at each end of
Remote Junction Box)
(d) Couple the free ends of the gas
tubes together
(e) Secure the tubing
e. Secure the tubing to prevent contact with pilot arc resistor.
f. Replace the top and right side panel of the power supply.
Important Note:
Ensure tubing is securely
fastened at least 1 inch
away from pilot arc resistor.
Pilot Arc Resistor
(c) Re-route Input Air Hose