ESAB Aristo U82, Instruction Manual

Page: 8 / 96

2 INTRODUCTION
0460 896 274
- 8 -
© ESAB AB 2013
Menu key (5)
Using the MENU key always takes you back to the main menu:
Enter key (6)
Using the enter key confirms a selection.
Cursor knob (2)
Using the left-hand knob moves the cursor to different rows in the display.
Plus/minus knobs (7, 8)
The right-hand knobs increase or decrease the value of a setting. To the side of the knobs
there is a symbol, a square # or a star *. Most numerical settings can be adjusted with either
knob, although certain settings have to be made with a particular knob.
2.2 Location
On the reverse of the control panel there is a
fold-out stand that enables you to put the
panel down and still view the display in an
upright position. The stand also acts as a
mounting device, enabling the control panel
to be hung on the wire feed unit.
2.3 USB connection
External USB memories can be used to transfer programs to and from the control panel.
See more in the "Export/Import" section.
The files that are produced in the control panel are stored as xml files. The USB memory
must be formatted as FAT 32 in order to work.
During normal use there is no risk of “viruses” being able to infect the equipment. To
eliminate this risk entirely, we recommend that the memory that is used together with this
equipment not be used for any other purpose.
Certain USB memories may not work with this equipment. We recommend using USB
memories from a reputable supplier. ESAB assumes no responsibility for any damage
caused as a consequence of the incorrect use of a USB memory.