Network Camera User Manual
132
recommended.
Capture Times
[1~10]: Refers to the capture times a face will be captured during its
stay in the configured area. The default value is 1.
Sensitivity
[1~5]: The sensitivity to identify a target. The higher the value, the easier a
face will be recognized, and the higher misinformation is. The default value of 3 is
recommended.
Capture Interval
[1~255 Frame]: The frame interval to capture a picture. If you set
the value as 1, which is the default value, it means the camera captures the face in every
frame.
Capture Sensitivity
[0~20]: The threshold the camera treats the target as a face. Only
when the face score generated by the algorithm is equal or higher than the value, the
camera will treat the target as a face. The default value of 2 is recommended.
Face Capture Advanced Parameters:
Face Exposure
: Check the checkbox to enable the face exposure.
Reference Brightness
[0~100]: The reference brightness of a face in the face exposure
mode. If a face is detected, the camera adjusts the face brightness according to the value
you set. The higher the value, the brighter the face is.
Minimum Duration
[1~60min]: The minimum duration of the camera exposures the
face. The default value is 1 minute.
Note:
If the face exposure is enabled, please make sure the WDR function is disabled,
and the manual iris is selected.
Enable Face ROI
: If the camera captures a face, the face area will be treated as the
region of interest, and the image quality of this area will be improved.
Restore Default
: Click
Restore
to restore all the settings in advanced configuration to
the factory default.
People Counting
Purpose:
People function is used to calculate the number of object entered or exited a certain
Summary of Contents for MicroView MVIB-04IR-E
