Network Camera User Manual
113
Line Crossing Detection
2.
Check the checkbox of
Enable
to enable the function.
3.
Select the line from the drop-down list.
4.
Click
Area Settings
tab and click
Draw Area
button, and a virtual line is displayed
on the live video.
5.
Drag the line, and you can locate it on the live video as desired. Click on the line,
two red squares are displayed on each end, and you can click-and-drag one of the
red squares to define the shape and length of the line.
6.
Set the Max. Size and Min. Size for valid targets. Targets smaller or larger than the
valid target size are not able to trigger detection.
Summary of Contents for MicroView MVIB-04IR-E
