ERNITEC MicroView MVIB-04IR-E, User Manual

Page: 73 / 171

Network Camera User Manual
68
1) Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
2) Create a verification code or change the verification code for the camera.
Note:
•
The verification code is required when you add the camera to Guarding Vision
app.
•
For more information about the Guarding Vision app, refer to Guarding Vision
Mobile Client User Manual.
4. You can use the default server address. Or you can check the Custom checkbox on
the right and input a desired server address.
5. Click Save to save the settings.
Wireless Dial
Purpose:
Data stream of audio, video and image can be transferred via 3G/4G wireless network.
Notes:
•
The wireless dial function may not be supported by some camera models.
•
Camera that supports wireless dial does not support PPPoE.
Steps:
1. Click Wireless Dial tab to enter the Wireless Dial configuration interface:
Configuration > Network > Advanced Settings > Wireless Dial
2. Check the checkbox to enable the wireless dial settings.
3. Configure the dial parameters.
1) Select the dial mode from the drop-down list. Auto and Manual are selectable.
If Auto is selected, you can set the arming schedule for dialing; If Manual is
selected, you can set the offline time and manual dialing parameters.
2) Set the access number, user name, password, APN, MTU and verification
protocol. You can also leave these parameters blank, and the device will adopt
the default settings for dialing after other parameters are configured.
3) Select the network mode from the drop-down list. Auto, 3G and 4G are